How do I verify my HVAC contractor is licensed in Texas?

The [Texas Department of Licensing and Regulation (TDLR)](https://www.tdlr.texas.gov/licensing/verify-a-license/) maintains a public license lookup for all Air Conditioning and Refrigeration (ACR) contractors and technicians. Search by company name, individual name, or license number — results show license status, expiration date, and any disciplinary actions. A valid contractor license is required for any Fort Worth business performing HVAC work. Individual technicians working on your system must also hold personal ACR technician licenses — ask for both the company and technician license numbers before authorizing work.

What does HVAC replacement cost in Fort Worth?

For a typical 1,500–2,000 sq ft Fort Worth home: a 3-ton central AC unit replacement runs $4,200–$6,800 installed; a full split system (AC + gas furnace) runs $7,500–$12,000; and a heat pump system runs $6,500–$11,000. BLS data shows HVAC technician wages in the Dallas-Fort Worth MSA averaging $24–$38/hr. Fort Worth pricing typically runs 5–10% below the Dallas core. Get quotes from at least 3 licensed contractors — pricing across Fort Worth HVAC firms varies significantly, and a reputable contractor will provide a Manual J load calculation before recommending equipment size.

Does Fort Worth require a permit for HVAC replacement?

Yes. The City of Fort Worth requires a mechanical permit for HVAC system replacements through the [Fort Worth Development Services Department](https://www.fortworthtexas.gov/departments/development-services). Your licensed contractor should pull this permit — if they suggest skipping the permit "to save money," this is a red flag. An unpermitted replacement voids most manufacturer warranties and can affect homeowner's insurance claims. In Tarrant County's unincorporated areas (parts of Keller, Burleson, Mansfield), the county jurisdiction requires its own permit — confirm your exact jurisdiction with your contractor.

Should I replace my R-22 system or keep recharging it?

Replace it. R-22 (Freon) production was banned in 2020 under the EPA's Montreal Protocol implementation. The remaining supply is from recycled/reclaimed stock only — prices have risen to $200–$400/lb and continue climbing. Most pre-2010 Fort Worth systems using R-22 are also 15+ years old and nearing end of equipment life regardless. A major repair on a failing R-22 system — compressor, coil, or refrigerant leak in hard-to-access tubing — almost always costs more than the value added. New systems (R-410A transitioning to R-454B) are dramatically more efficient; a 16 SEER2 replacement versus a surviving 10 SEER R-22 unit cuts cooling electricity consumption by 37–40%.

Are there tax credits for HVAC replacement in Fort Worth?

Yes. The [Inflation Reduction Act Section 25C Energy Efficient Home Improvement Credit](https://www.energystar.gov/about/federal_tax_credits) offers Fort Worth homeowners: 30% of cost up to $600 for qualifying central AC or heat pump units (must meet ENERGY STAR Most Efficient or specific SEER2/EER2 thresholds); 30% up to $2,000 for qualifying heat pump systems specifically (separate, higher cap); and 30% up to $150 for a pre-upgrade home energy audit. Additionally, Oncor (Fort Worth's electricity distributor) offers rebates through participating contractors — check [oncor.com/save](https://www.oncor.com/save) for current rebate amounts. These programs can collectively reduce a $10,000 heat pump installation to an effective net cost of $7,000–$8,000.

Heat pump or gas furnace — which is better for Fort Worth?

For most Fort Worth homes built after 2000, a heat pump system is the better long-term choice. Fort Worth's mild winters (average January low 33°F) mean heat pumps operate efficiently in heating mode more than 95% of winter hours — only extreme cold snaps (below 20°F) significantly drop heat pump efficiency. A dual-fuel heat pump (heat pump primary, gas backup for extreme cold) offers the best of both worlds and qualifies for higher IRA tax credits. For pre-2000 homes with existing gas infrastructure and duct systems sized for gas heat, a gas furnace replacement may be the simpler near-term choice. Any reputable Fort Worth HVAC contractor can model both options with energy cost projections using your home's Manual J data.

Why does my Fort Worth HVAC system fail so often?

The most common failure patterns in Tarrant County: (1) Capacitor failure from summer heat cycling — capacitors degrade rapidly in 100°F ambient temperatures; (2) Refrigerant leaks at vibration points (schrader valves, flare fittings) from years of thermal expansion/contraction cycling; (3) Duct leakage in unconditioned attics at 140–160°F — flex duct joints loosen, insulation degrades, and supply/return pressure imbalances develop; (4) Drain pan overflow from high summer humidity condensation rates — a clogged condensate drain shuts down the system. Annual maintenance contracts ($140–$280/year from reputable Fort Worth firms) prevent most of these failures with spring AC tune-ups and fall heating checks.

Best HVAC Repair & Replacement Companies in Fort Worth, TX

Compare hvac repair & replacement companies companies in Fort Worth side by side. ProList Local lists 145 vetted businesses — read reviews, check credentials, and request quotes in minutes.

Browse all services in Fort Worth, TX ->

Get Free Quotes →

145contractors

Get Free Quotes →Browse Contractors ↓

HVAC Repair & Replacement Companies Planning Guide for Fort Worth, TX

Typical cost in Fort Worth

$1,500–$8,000 / project

Get a free quote

Need detailed pricing, linear-foot ranges, and hidden cost breakdowns? See the full hvac repair replacement cost guide for Fort Worth, TX →

145 contractors in Fort Worth

All HVAC Repair & Replacement Companies Contractors145

Fort Worth Climate Control 41

2810 Main Street, Fort Worth, TX

Full-service heating and cooling company with 15+ years of experience. We install, repair, and maintain all major brands with upfront pri¦